GETTING STARTED
1.
Download the OHA app from the Apple App Store or the Android Play Store.
Look for the colorful four-box OHA app symbol. The OHA app is a dedicated
healthcare browser that interfaces with the Vitality user interface screen.
2.
Connect the cable to the ear clip.
Insert the silver post of each wire into the back
of each of the black conductive electrodes on the ear clip.
3.
Attach a clothing/collar clip to the cable about 6-8 inches from the ear clip.
The clothing clip
helps to take excess weight off the ear making use of the Smartcable comfortable and
convenient.
4.
Open the OHA app on your phone.
Tap on the OHA app icon.
5.
Wipe your ear and the contact surfaces of the clip with a moist alcohol swab.
This removes
natural oils on the skin and helps to ensure good conduction. Be sure to use high-quality (70%)
alcohol swabs.
6.
Attach the ear clip to the tragus or concha of the ear.
Attach the collar clip to take the weight
of the cable off your ear.
7.
Tap the "Start" button to switch app on.
8.
Increase voltage until you feel a current.
Most users will feel some electric tingling at the ear
around 30-50V. Occasionally a user may need to increase the voltage to higher levels to be felt.
The difference in sensing the electricity is due to fluctuations in moisture, oil content of the skin,
and the density of nerve fibers.
9.
Once you feel the current, decrease the voltage by 10v.
If you felt the current at 30V
, you’ll run
the Vitality Smartcable
™
at 20V.
If you felt the current at 50V
, you’ll run the Smartcable at 40
V
and so on.
This step increases maximal neuromodulation stimulation. You do not need to feel
the current for it to be effective.
10.
Replace the ear clip after 3 months of regular usage.
Carbon-rubber electrodes may lose their
conductivity over time. Discard the ear clip if its contact surface becomes cracked, worn or if the
electrode face loses its sheen.
Note
:
Children under age 18 should only use the 10V setting
.
OHA