Nemesis OSCA-O4 User Manual Download

Page: 2 / 4

PERFORMANCE INSURANCE

PRODUCTION TOOLS

•

SHOW CONTROL

•

BACKUP SOLUTIONS

www.nemesis-research.com

Overview

The OSCA-O4 is a next generation multiple command destination show control solution

featuring OSC Network input, POE or 5v DC powering and four independent “volt-free dry

closure” relays rated at 0.5 amp 60vdc or 100vac (max)

Front Panel

Rear Panel Connections

Power & Network –

OSCA can be powered by POE or 5v DC via the USB C port

4 Display LED’s –

LED will come on when relay is closed

GPO Relays –

Volt-free dry closure relays rated at 0.5 amp 60vdc or 100vac (max). Connect

your device across a pair /-. Do not exceed the current or voltage of 0.5 amp 60vdc or

100vac per relay otherwise damage will be incurred. Do not connect 240v AC units directly to

the OSCA-O4.

Summary of Contents for OSCA-O4

Page 1: ...1 PERFORMANCE INSURANCE PRODUCTION TOOLS SHOW CONTROL BACKUP SOLUTIONS www nemesis research com OSCA O4 4 Channel OSC Relay Output USER GUIDE...

Page 2: ...relays rated at 0 5 amp 60vdc or 100vac max Front Panel Rear Panel Connections Power Network OSCA can be powered by POE or 5v DC via the USB C port 4 Display LED s LED will come on when relay is close...

Page 3: ...y Settings You can Manually toggle the 4 relays using the toggle switches on the relays setting page This will also update if the relay state is changed via OSC To turn relays on and off send the foll...

Page 4: ...N TOOLS SHOW CONTROL BACKUP SOLUTIONS www nemesis research com Factory Reset Press the reset button at power on to reset the network settings to default Please then power cycle the unit for the change...