Operating lnstructions Cont.
■
Battery Charging
1. Plug the AC charger plug into the wall socket. Ensure the electrical outlet
meets the charger's specifications.
2. Position the battery cartridge into the battery charger.
The LED indicator light will go out when the battery is
fully charged.
3. Charging time for the 2.0 Ah battery cartridge is
approx. 35 minutes. When stored in the charger,
the battery will stay fully charged.
■
Battery Cartridge
1. To release the battery, press on the battery latch and pull the battery out.
2. To install the battery, slide the battery into the base of the tool handle until it
clicks into place. The battery should be secured and unmoveable.
ATTENTION
• Remove the
,
battery cartridge before
exchanging the tool dies or cleaning
the tool head.
• Do not disassemble or attempt to repair
the battery cartridge. Follow battery
disposal guidelines.
9
