OPERATION
MANUAL
11
MIDDLE STRIP
Picture 5
MIDCUT: on / off
5.1. DIA MODIFY: when the middle stripping wire and the copper
wire are too tight to be stripped, the cutting depth of the middle
stripping can be slightly increased.
For example, 0.1 means 0.1+
【
Picture 1
】
wire diameter.
5.2. LENGTH MODIFY: the last end is provided with a liner on the
top, and the total length can be finely adjusted to remove the liner.
5.3. POS 01: The length of the cut wire from the wire to the first
place in the middle; Stripping: The peeling distance from the first
place in the middle.
5.4, POS 02: The length of the skin cut from the top of the wire to
the second place in the middle; Stripping: The stripping distance
from the second place in the middle.
By analogy ...
Summary of Contents for NTCS Series
Page 10: ......
Page 12: ...OPERATION MANUAL 12...
