that may affect the power tool’s operation. If damaged, have
the power tool repaired by an authorized service technician.
Caution: Under no circumstances should the power tool
be opened for repairs or any other purpose by anyone
other than an after-sales service technician authorized
by Nemo Power Tools. Opening the power tool
invalidates the manufacturer warranty.
♦
Use power tools, accessories, and tool bits in accordance with
these instructions and in the manner intended for the
particular type of power tool, taking into account the working
conditions and the work to be performed. Consult local, state,
and government occupational safety and health guidelines
before operating a power tool.
♦
Switch off the power immediately if the tool bit jams. Be
prepared for high reaction torque that can cause kickback. The
tool bit can jam when the power tool is subject to overload, or
if it becomes wedged in the workpiece.
♦
Hold the power tool with a firm grip. High reaction torque can
briefly occur while driving in and loosening screws.
♦
Work only on secured, stable items. Do not hold any item to be
worked on by the power tool in your hand. Secure the
workpiece, clamped with clamping devices or in a vice, to
ensure safety.
♦
Always wait until the power tool has come to a complete stop
before placing it down. The tool bit can jam and lead to loss of
control over the power tool.
♦
If using the rotary hammer above water or in hot conditions,
cool the tool down by dipping it in cool water regularly to
prevent overheating.
4
Summary of Contents for RH-22-6Li-50
Page 1: ......
