11
MERLIN 4
Installer Options
ENTER PROGRAMMING MODE
Before any of the installer options can be changed, the unit must be in programming mode.
To do so, enter the 6 digit installer PIN followed by the
* 0 #
keys.
•
The keypad will beep twice if the PIN was correct. The unit is now in programming
mode.
•
If no key is pressed for one minute, the system will automatically exit the
programming mode.
•
The default installer PIN is
0 1 2 3 4 5
EXIT PROGRAMMING MODE
When finished it is important to exit the programming mode. While in programming mode,
you will be unable to access any user functions from the keypad.
INSTALLER PIN
The default installer PIN can be changed by pressing the
0
key twice, followed by the new
PIN and the
#
key.
•
The new PIN must be 6 digits long.
•
If you cannot remember the PIN, default the unit and use
0 1 2 3 4 5
as the PIN.
SIREN-ON TIME
The time that the siren will be on for, can be changed by pressing
the
0
key, followed by the
1
key. Select the desired time from the
table and press the corresponding number from
0
to
4
followed by
the
#
key. The keypad will beep twice to indicate that the new setting
was accepted.
Example: To change the Siren-On Time to 4 minutes,
enter
0 1 4 #
The default Siren-On Time is
4 minutes
.
0
10 Sec
1
30 Sec
2
1 Min
3
2 Min
4
4 Min
#
0
#
#
0
0
1
0
#
