Wireless connection
Wireless connectivity can be adjusted with this setting. Connectivity can be switched on or off:
When connectivity is switched on, the panel responds to other interactive products in the room,
such as a Nenko Interactive - Cube.
Switch connectivity on or off using the up and down arrow buttons. Select the desired setting and
then press OK again to save this setting.
Linking
There are 5 linking channels. Channel 0 is the factory default setting. When the panel is set to
Channel 0, all compatible interactive switches in the room will operate the panel, for example, oval
external, Nenko Interactive - Cube.
Select the desired link channel with the up and down arrow buttons. Select the desired setting and
then press OK again to save this setting.
The panel does not have to be connected, this is already done
Channel 0: Factory setting
Channel 1:
6. Maintenance
This panel is designed for low maintenance. Clean the outside as desired with a soft, damp cloth.
