Couple
There are 5 coupling channels. Channel 0 is the default factory setting. When the panel is set to
Channel 0, all compatible interactive switches in the room will operate the panel, e.g. oval external,
Nenko Interactive
–
Cube.
Select the desired pairing channel using the up and down arrow buttons. Select the desired setting,
and then press OK again to save it.
The panel does not need to be connected, this is already set when you plug it in.
Channel 0: Factory reset Channel 1:
8. Maintenance
These panels are designed for low maintenance. Clean the outside as desired with a soft, damp
cloth.
9. Technical information
INPUT: 100-240V 50/60Hz, 1.5A
OUTPUT: 12V 5A
Power approvals:
For more information, please visit our website
