NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 51
3.3.5 - Attachment of the rear profile to the Y-end plate (fixed
end)
Article Nr.
Description
Quantity
1
Precision washer 10x5x1
6
2
M5 x 16mm flat head screw
6
Use the T-nuts inserted into the 2040 profile in chapter 3.1.1 to attach the Y-end plate
–
fixed end to
the 2040 profile (rear).
Since the final position of the X-axis is not known before the X-axis is incorporated into the
construction, do not fully tighten the M5 x 16 mm flat head screws.
