Seite
16
von
58
8.5 Connect to Receiver Device
1) WIPS will search and list the TWP-1000 receiver Device. You can select the
target receiver device and press the “OK” button to connect the selected
receiver device.
2) You can press the “Refresh” button to search again.
3) If you can’t find the target receiver device from the list, you can press the
“Manual” button to enter the receiver IP address manually and connect.
8.6 Login
1) When it connects to a “Code” protection enabled TWP-1000 receiver, you
have to enter the “Code” and press the “Connect” button to login the
receiver.
(You can find the CODE from the right-upper of OSD standby screen)
