background image

Chapter 9.0 EULA

9.0 EULA

IMPORTANT - READ CAREFULLY: DSC Software 

purchased with or without Products and Components
is copyrighted and is purchased under the following 

license terms:
This End-User License Agreement (“EULA”) is a 

legal agreement between You (the company, indi-

vidual or entity who acquired the Software and any 

related Hardware) and Digital Security Controls, a 

division of Tyco Safety Products Canada Ltd. 

(“DSC”), the manufacturer of the integrated security 

systems and the developer of the software and any 

related products or components (“HARDWARE”) 

which You acquired.
If the DSC software product (“SOFTWARE 

PRODUCT” or “SOFTWARE”) is intended to be 

accompanied by HARDWARE, and is NOT accom-

panied by new HARDWARE, You may not use, copy 

or install the SOFTWARE PRODUCT. The 

SOFTWARE PRODUCT includes computer software, 

and may include associated media, printed materials, 

and “online” or electronic documentation.
Any software provided along with the SOFTWARE 

PRODUCT that is associated with a separate end-user 

license agreement is licensed to You under the terms 

of that license agreement.
By installing, copying, downloading, storing, access-

ing or otherwise using the SOFTWARE PRODUCT, 

You agree unconditionally to be bound by the terms 

of this EULA, even if this EULA is deemed to be a 

modification of any previous arrangement or contract. 

If You do not agree to the terms of this EULA, DSC 

is unwilling to license the SOFTWARE PRODUCT 

to You, and You have no right to use it.
SOFTWARE PRODUCT LICENSE
The SOFTWARE PRODUCT is protected by copy-

right laws and international copyright treaties, as 

well as other intellectual property laws and treaties. 

The SOFTWARE PRODUCT is licensed, not sold.
1. GRANT OF LICENSE  This EULA grants You the 

following rights:
(a) Software Installation and Use - For each license 

You acquire, You may have only one copy of the 

SOFTWARE PRODUCT installed.
(b) Storage/Network Use - The SOFTWARE 

PRODUCT may not be installed, accessed, displayed, 

run, shared or used concurrently on or from different 

computers, including a workstation, terminal or other 

digital electronic device (“Device”). In other words, if 

You have several workstations, You will have to 

acquire a license for each workstation where the 

SOFTWARE will be used.
(c) Backup Copy - You may make back-up copies of 

the SOFTWARE PRODUCT, but You may only have 

one copy per license installed at any given time. You 

may use the back-up copy solely for archival pur-

poses. Except as expressly provided in this EULA, 

You may not otherwise make copies of the 

SOFTWARE PRODUCT, including the printed mater-

ials accompanying the SOFTWARE.
2.  DESCRIPTION OF OTHER RIGHTS AND 

LIMITATIONS
(a) Limitations on Reverse Engineering, Decom-

pilation and Disassembly - You may not reverse 

engineer, decompile, or disassemble the SOFTWARE 

PRODUCT, except and only to the extent that such 

activity is expressly permitted by applicable law not-

withstanding this limitation. You may not make any 

changes or modifications to the Software, without the 

written permission of an officer of DSC. You may 

not remove any proprietary notices, marks or labels 

from the Software Product. You shall institute reas-

onable measures to ensure compliance with the terms 

and conditions of this EULA.
(b) Separation of Components - The SOFTWARE 

PRODUCT is licensed as a single product. Its com-

ponent parts may not be separated for use on more 

than one HARDWARE unit.
(c) Single INTEGRATED PRODUCT - If You 

acquired this SOFTWARE with HARDWARE, then 

the SOFTWARE PRODUCT is licensed with the 

HARDWARE as a single integrated product. In this 

case, the SOFTWARE PRODUCT may only be used 

with the HARDWARE as set forth in this EULA.
(d) Rental - You may not rent, lease or lend the 

SOFTWARE PRODUCT. You may not make it avail-

able to others or post it on a server or web site.
(e) Software Product Transfer - You may transfer all 

of Your rights under this EULA only as part of a per-

manent sale or transfer of the HARDWARE, provided 

You retain no copies, You transfer all of the 

SOFTWARE PRODUCT (including all component 

parts, the media and printed materials, any upgrades 

and this EULA), and provided the recipient agrees to 

the terms of this EULA. If the SOFTWARE 

PRODUCT is an upgrade, any transfer must also 

include all prior versions of the SOFTWARE 

PRODUCT.
(f) Termination - Without prejudice to any other 

rights, DSC may terminate this EULA if You fail to 

comply with the terms and conditions of this EULA. 

In such event, You must destroy all copies of the 

SOFTWARE PRODUCT and all of its component 

parts.
(g) Trademarks - This EULA does not grant You any 

rights in connection with any trademarks or service 

marks of DSC or its suppliers.
3. COPYRIGHT - All title and intellectual property 

rights in and to the SOFTWARE PRODUCT (includ-

ing but not limited to any images, photographs, and 

- 24 -

Summary of Contents for HS2128 E









































Reviews: