P. 5
- Neo Nexus Split 4
English version
Restore Data
Restore device data formTF-Card
Default Setting
Restore factory settings
4. OPERATION INSTRUCTIONS
Navigator Switch buttons
UP, DOWN, LEFT, RIGHT and ENTER in the middle.
Indicator lights on frontpanel
RED: Power LED;
GREEN: DMX in;
YELLOW: DMX Error;
WHITE: Current out of range
Indicator lights on back panel
GREEN: DMX Out;
YELLOW: Power Out
How to record scenes
Firstly, enter into Source->Scene->Record Scene,
then input DMX signal source, click Record, wait for
Record Finish.
How to play recorded Scenes
Firstly, enter into Source->Scene->Play Scene,
select the wanted file and output port, click Play.
When show “Play Complete”, then finish.
How to record Shows
Firstly, enter into Source->Show->Record Show,
then input file name, select record mode and input
DMX signal source, click Record, and click Stop
when finish. Record Modes:
Manual: manual start and manual stop.
Semi_Auto: buto start but manual stop.
Auto: nonzero start, zero stop.
How to play recorded Shows
Firstly, enter into Source->Scene->Play Show,
select the wanted file and output port, click Play to
start and click stop play to finish. Play modes: One
Play & Loop Play
