Chapter 6: Settings
The Bluetooth GPRS Phone
186
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
HCI Version & LMP Version
display the version of the chip firmware.
Component
indicates the version of the Psion Teklogix
Bluetooth
Subsystem (the manager,
drivers, etc).
Profiles
lists the supported profiles on this specific NEO.
6.37.6 The
Bluetooth
GPRS Phone
Once you’ve completed the
Bluetooth
settings, you can go ahead and set up communication
through your
Bluetooth
-equipped phone.
Before you begin, make certain that the
Bluetooth
phone is turned on, that the
Bluetooth
radios in NEO and your phone are enabled (turned on), and that the hand-held and phone are
within 10 metres of each other. Both should be discoverable.
1. Tap on
Start>Settings
, and then tap on the
Connections
tab.
2. Tap on the
Connections
icon. Tap on
Add a new modem connection
.
3. Type a name for the connection.
4. Tap on the
Select a modem
drop-down menu, and choose
Bluetooth
. Tap on
Next
.
5. Make certain that the phone is discoverable. Some phones also need to be pairable
in order to accept a bonding request. Refer to your phone documentation for addi-
tional information.
6. If the phone appears in the
My Connections
list, skip to step 13.
7. In the list, tap the
phone
and then tap on the
Next
button.
8. In the
PIN
screen, type a personal identification number (PIN) – you can enter up to
16 characters.
9. Enter the
same
PIN on the phone.
