Appendix B: Teklogix Imagers Applet
Code 11
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
B
-31
these parameters displays a screen in which you can set the minimum and maximum allow-
able code lengths –
4 to 48.
B.5.13 Code 11
Enabled
Set this parameter to
on
to enable “Code 11”.
Check Digits
Double-tapping on this parameter displays a dialog box in which you can choose
One Check
Digit
or
Two check digits
.
If this parameter is set to
One Check Digit
, it is assumed that the last digit is a check digit. If
it is set to
Two Check Digits
, it is assumed that the last two digits are check digits.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
1 to 80.
B.5.14 Interleaved 2 of 5
Enabled
Set this parameter to
on
to enable “Interleaved 2 of 5”.
Check Char
When this parameter is set to on, the integrity of a “Interleaved 2 of 5” symbol is checked to
ensure that it complies with specified algorithms.
Check Char Strip
If you enable this parameter, a check character is stripped from the decoded bar code data.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
2 to 80.
