Appendix C: Bar Code Settings
Code 128
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
C
-9
Add/Remove Data
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code. Press the key
you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key
value of the keypress is displayed.
Suffix Char
This character, if non-zero, is added after a successfully decoded bar code. Press the key you
want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of
the keypress is displayed.
Strip Leading
This parameter determines the number of characters that will be removed from the begin-
ning of the bar code before the prefix character is added.
Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.
C.2.6
Code 128
Enabled
Set this parameter to
on
to enable “Code 128”.
Enable GS1-128/GS1 US
Previously UPC/EAN and UCC, these types of bar codes include group separators and start
codes.
Enable ISBT 128
To successfully scan this variation, “Enable ISBT 128” must be set to
on
.
Decode Performance
If this parameter is set to ‘on’, one of three decode levels assigned to the “Decode Perfor-
mance Level” parameter can be selected.
Note: For Code 39 bar codes, the “AIAG Strip” is performed
before
the “Strip Leading”.
