C
-16
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
Appendix C: Bar Code Settings
Discrete 2 of 5
Set Length L1 and Set Length L2
Lengths for “Interleaved 2 of 5” can be set for
Any length
,
Length within a range
,
One dis-
crete length
or
Two discrete lengths
. The length of a code refers to the number of characters
(i.e., human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled
Set Code Lengths
where
you can define the code length that will be recognized by your scanner.
Choosing
One discrete length
allows you to decode only those bar codes of a specified
length. Choosing
Two discrete lengths
allows you to specify two lengths of bar codes that
may be decoded.
Length within a range
allows you to decode a code type within a specified
range from 4 to 14.
Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to
ensure it complies with a specified algorithm – either USS (Uniform Symbology Specifica-
tion) or OPCC (Optical Product Code Council).
Transmit Check Digit
If this parameter is enabled, the check digit is included with the bar code data.
Convert to EAN 13
If this parameter is enabled, the I 2 of 5 bar code is converted to EAN 13.
Length Restriction
Refer to “Length Restriction” on page C-8 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-9 for details.
C.2.16 Discrete 2 of 5
Enabled
Set this parameter to
on
to enable “Discrete 2 of 5”.
Set Length L1 and Set Length L2
Lengths for “Discrete 2 of 5” can be set for
Any length
,
Length within a range
,
One discrete
length
or
Two discrete lengths
. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
