Appendix C: Bar Code Settings
GS1 DataBar
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
C
-17
Double-tapping on this parameter displays a dialog box labelled
Set Code Lengths
where
you can define the code length that will be recognized by your scanner.
Choosing
One discrete length
allows you to decode only those bar codes of a specified
length. Choosing
Two discrete lengths
allows you to specify two lengths of bar codes that
may be decoded.
Length within a range
allows you to decode a code type within a specified
range from 1 to 12.
Length Restriction
Refer to “Length Restriction” on page C-8 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-9 for details.
C.2.17 GS1 DataBar
All
GS1 DataBar
bar codes encode a GTIN-12 or GTIN-13 in a 14-digit data structure. In
order to make the GTIN-12 or GTIN-13 a 14-digit data structure, a leading zero or zeros is
filled to the left of the GTIN.
Enable GS1 DataBar Omni, Expanded & Limited
GS1 DataBar Omni
and
GS1 DataBar Expanded
have omnidirectional scanning capability.
GS1 DataBar Limited
can only be scanned by a linear hand-held scanning device. They
cannot be scanned by omnidirectional scanners. Each of these options can be turned
on
or
off
depending on the scanner installed in your hand-held.
Length Restriction
Refer to “Length Restriction” on page C-8 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-9 for details.
C.2.18 Composite
A composite symbol includes multi-row 2D components making it compatible with linear
and area CCD scanners along with linear and rastering laser scanners.
Important: To successfully read this type of bar code, the two types of symbologies
included in a composite bar code must be enabled. In addition, “Center Bar
Code Only” must be disabled.
