Chapter 2: Basic Checkout
Advanced Tab
20
NEO Hand-Held with Windows Mobile 6.1 User Manual
2.4.4
Advanced Tab
If you prefer to use
Wireless Zero Config
, the Windows native supplicant, to configure the
radio:
•
Tap on the
Advanced
tab, and tap on the checkbox to the left of
Use Windows to con-
figure my wireless settings
to add a check mark and activate this option.
•
Press
[FN/BLUE][ENTER]
to reset NEO.
•
A dialog box lets you know that you will lose all unsaved data. Tap on
OK
.
Once the reset is complete, the
Wireless Zero Config
screen is displayed on NEO.
The following radio and security options must be defined:
SSID
,
Auth Type
,
EAP Type
and
Encryption
.
2.5
Checking The Scanner
If your hand-held is equipped with an internal scanner, you can test it to ensure that it is op-
erating properly. Point the scanner window at a bar code that your scanner was designed to
decode. Press the [SCAN] key or the pistol trigger, and check for a valid decode on the
hand-held screen.
Performance is improved if you disable all unneeded bar codes in the
Bar Codes
screen.
Review Appendix C: “Bar Code Settings” for details about bar codes.
2.6
Data Transfer Between the PC & the Hand-Held
Data transfer options vary slightly depending on the type of operating system installed in
your PC. Microsoft® ActiveSync® is PC connectivity software that can be used to connect
Tap here to add a checkmark
to activate the Windows radio
configuration.
