Chapter 3: Get To Know NEO
Switching the Hand-Held On and Off
30
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
•
Desktop Docking Station (Model No. PX3001) – operates as both a charger and a
docking station. Operating as a charger, both the battery installed in the hand-held and a
spare battery can be charged simultaneously.
•
Desktop Docking Station with Integrated V.92 Analog Modem (Model No. PX3008) –
integrates docking and analog modem functionality. Operating as a charger, both the
battery installed in the hand-held and a spare battery can be charged simultaneously.
Operating as a modem, this dock provides USB connectivity and data connections over
a PSTN line.
•
Quad Docking Station (Model No. PX3004) – can charge the battery of up to four
NEOs inserted in the docking station.
The charge time required to make NEO ready for use varies depending on the type of
docking station used. A hand-held inserted in docking station requires 3 hours to charge the
battery to 75% capacity. NEO is equipped with an intelligent charging system that protects
the battery from over-charging by terminating the charge process when the battery is at
maximum capacity.
3.3
Switching the Hand-Held On and Off
Switching On NEO
•
To switch the unit on, press and hold down the
[ENTER]
key for at least one second.
•
When the LED flashes green, release the
[ENTER]
key.
The startup
Today
screen is displayed.
Note: The specified battery charge times are based on NEO in suspend mode. Additional
peripherals and other power consumption features will alter the specified charge
time.
Note: Refer to “Monitoring the Battery and Maximizing Run Time” on page 40 for addi-
tional information about the battery.
Important: To avoid damaging the battery, the charge process will not begin until the
battery temperature is between 0°C to 45°C (32°F to 113°F).
Note: If NEO is in suspend state, pressing [ENTER] ‘wakes’ the unit from this state. The
screen in which you were working before the computer entered suspend state is
displayed.
