15201 Betmakers TSST_Quick Start Guide_ECN 5847
Page 3 of 6
1.0 Unpacking TSST Kiosk
Remove the strapping from the TSST outer carton.
Caution: The strapping is under tension and can flick
when cut.
Carefully lift the outer carton off the Pallet. Ensure
the internal packaging is free from damage.
Remove all packaging provided from the Kiosk
components.
Remove and clear the film from the Teller LCD
screen.
Carefully remove the Kiosk off the Pallet and
assemble following the Betmakers User Service
Manual.
Position the Kiosk in the final location.
Caution:
Kiosk weight without = 62lbs.
Kiosk weight with BNA = 72lbs.
Kiosk requires a two-person lift.
Carefully remove the Customer Screen from the
separate packaging.
Check that the 2x M6 Unbrako Bolts on rear of LCD
Screen and 2x M6 Nyloc Nuts on the LCD Stand Arm
are tight prior to installation to the TSST Main
Chassis.
If loose, tighten with 5mm Allen Key &/or 10mm
Spanner.
Open TSST Top Lid & present the Customer Screen
assembly to the TSST Main Chassis (Step 1).
Position and slide the LCD Screen Mount to the
TSST Main Chassis towards the LH Side (Step 2),
nesting the Mount into the slotted holes.
Tighten the 2x M8 Button Head screws on the
chassis using the same 5mm Allen Key (Step 3).
QUICK START GUIDE
CAUTION: Servicing of this product or unit is to
be performed by trained service personnel only.
2 x M6 Unbrako
2 x M6 Nyloc Nut
1
2
3
3
