Feeder setting
All components’ setting on this files list, like: nozzle selecting, stack setting, the location of pick components, adjustment
setting, and others components’ setting need to be finished here. We can see that No.1-33 stack on bottom line, No.34-66
stack on top line, No. 67-76 feeders are the tray stack.
5.1 Function of feeder setting interface
(1) Assign all sequentially: After complete component information setting, click ‘Assign all sequentially’, the setting
information will be assigned to each feeder automatically.
(2) Assign feeder and nozzle: After complete stack information and nozzle setting, click ‘Assign feeder and nozzle’, all
information will update to the component list automatically.
(3) Footprint library: The normal component information is saved in the footprint library including name, length, width,
height, edge, pitch etc. Please note the detail information for the IC is necessary. The interface of footprint library as below:
25
Zhejiang
NeoDen Technology Co.,Ltd.