17
To add Groups to the current account, press the Ctrl key and click on the displayed Groups. The selected
Groups are marked dark blue and their IDs are listed at the right side of the Groups field.
This field appears only if you have already created at least one group (Settings/Groups Tab).
Device:
In this drop-down list, choose a device from which you want to add Inputs or Outputs to the current account.
Inputs/Outputs:
This field is used to add/remove Inputs or Outputs to/from the current account.
To add Inputs or Outputs to the current account, press the Ctrl key and click on the Inputs/Outputs of the
device selected in the previous field. The selected Inputs/Outputs are marked dark blue and their IDs are
listed at the right side of the Input/Output field.
The ePowerSwitch 4IEC supports number of peripherals which are clearly identified by specific ID Codes.
RST function only
With this function you can create an account which enables ONLY to restart specified power outlets (Buttons
ON and OFF do no longer appear). This function is very helpful if you have to restart the router used to
access to your Power Switch. It avoids to switch the router Off with no possibility to switch it On again. After
having pressed on the Restart button, the router will always automatically be switched On by the Power
Switch.
LOGOUT:
Click "Logout" at the bottom of the page to exit the session without saving changes.
DISCARD CHANGES:
Click "Discard Changes" at the bottom of the page to discard all the changes you have made on this page.
APPLY CHANGES:
Click "Apply Changes" at the bottom of the page to save changes.
Settings / Accounts / Hidden Page account
This account is intended for developers who want to implement the power outlet control in own programs. If
activated, they can access to a special page named hidden.htm and control individually the power outlets
using simple commands.
- To activate or deactivate this account, check or uncheck the corresponding checkbox.
- To modify the Hidden page account, click on "Edit" next to the corresponding account.
A new page appears, allowing you to set all the parameters of the account.
