12
Installing and Connecting an Additional Full HD Camera
The device supports memory cards from 8GB to 256GB. If the card is used for the first
time, the device may display a
“Memory
error”
message. Please format the memory card
using the Format key in Settings Menu.
To install an additional camera, we recommend you to contact a specialized installation
center. We do not recommend installing an additional camera without proper experience.
1. Select a location for the additional camera (for example, the rear bumper of a car) and
fix it by adjusting the viewing angle according to the camera level on the vehicle.
2. Route the additional camera cable under the car trim and connect it to the camera.
3. Connect the additional camera cable to the Type-C connector on the device (next to
the power connector).
4. Connect the power supply and check the operation of the device.
Interior Camera
Interior Full HD camera is designed for shooting inside the car. When the illumination
level recorded by the front camera is low, the cabin camera automatically switches to
Black&White mode to provide detailed shooting of events inside the car in low light levels.
Also, when the interior camera switches to Black&White mode, the infrared light is turned
on.
