12
ATTENTION:
Attempting to insert a memory card wrong may damage the
device and/or the memory card itself. Make sure the memory card is in the
correct position.
Warning:
Do not apply excessive force when inserting a memory card to avoid
damage to the device. To insert a memory card, insert the microSD card into the slot
until it locks (clicks); if necessary, use a needle to push the card further. To remove the
memory card, push the card until it clicks and remove the card from the slot, if neces-
sary, use a needle to push the card.
Turning the device on/off.
When the car engine starts, the device
turns on automatically.
To turn the device on manually,
press the power button.
To turn the device off, press
and hold the power button for 3 seconds.
Loop recording
1) Insert the microSD card into the memory card slot; the Loop Recording mode
turns on automatically.
2) It is recommended to set a 3-minute cycle (Settings).
3) When there is no more space left on the memory card, the device will automatical-
ly replaces the oldest video file with the newest one; exception is the files protected
from deletion.
4) Video recordings taken in Loop Recording mode are stored in Driving folder.
