7
ATTENTION: If after the engine switch off the feeding to 12/24 V car socket
does not stop, the auto switch off function will not be activated. Consult
your car operation documents or car manufacturer for more detailed
information about your 12/24 V socket.
Urgent recording function
It is meant for protecting current video file from re-recording or removing
. In order to protect the current video file press MODE button during video
recording; the currently recorded file will get a special tag forbidding the device to
emove or re-record this file. At the top of display a key icon will appear.
Note:
Protected files can be removed only by computer connected to the device
through USB cable from the kit. This can be done by formatting the memory
card, or through Menu, in Playback mode.
Parking mode
This function allows adjusting the G sensor’s sensitivity value at which the device
will start urgent recoding automatically. Recording completed, the device will
switch off again unless external feeding is supplied. As soon as push or knock
on your car is recorded by G sensor, recording will start automatically even if the
recorder is switched off and external feeding is missing. If the video recorder gets
external feeding, upon switching on, it will continue recording the video in a
usual mode without switching off any more.
Motion detection
Upon switching on this function recording will start automatically if any motion
is recorded in the frame.
Note:
This function is meant for a standing car. Do not switch on the motion
detection when you drive the car – this may lead to fragmented recording and
the memory card overflow.
