6
Step 3: Optional Connection
Printer
A printer can be attached for printing information you find useful. A color printer
allows you to print full color photos and artwork you find on the Internet. If this is
your first time using the [NeonSTB], you may skip this step and return later.
Your [NeonSTB] supports printers from the
following manufacturer’s:
Hewlett Packard
Epson
Canon
To connect a printer simply connect
one end of a parallel printer cable to the
printer port jack on the back of the
[NeonSTB] (see figure below). Then connect the other end of the printer cable to
the connector on your printer (refer to the printer owner’s manual). You will
not
need to use the software disks that came with your printer. All you need to do is
choose the printer as follows.
To choose a printer, follow these steps:
1. Press
Menu
to call up the Main Menu.
2. Point to the button marked
Box
and select it.
3. Point to the button
Peripherals
and select it.
4. A window will be displayed. Choose which printer you have connected.
Figure 1.5 Printer Connection.
Connections
Connect to your printer with a parallel port
cable.