10
2.3
Display Buttons
The machine has a graphical touch screen.
There are three buttons mounted at the display:
•
A: the clear key
When the clear key is pressed during processing
documents, the system will stop feeding
documents after completing the set. The set will
be inserted resulting in a cleared system which
is ready to process a new job. The envelopes
have to be removed manually if necessary.
When the system is stopped already and the
clear key is pressed, it will process one set of
documents and the system will be cleared.
When a feeder runs empty after the clear key is pressed, an
button will be
displayed together with the feeder empty message. By pressing the
button
the clear process will be continued ignoring the empty feeder.
•
B: the start key
When the start key is pressed the system starts processing.
•
C: the stop key
After pressing the stop key the system does not stop immediately, but on the first
opportunity while processing. Because of this there can be incomplete sets in some
parts of the system.
Caution
The display is covered with a thin pressure-sensitive layer. To avoid permanent damage of
the display, do not use sharp objects to press on the display.
2.4
Software Description
2.4.1
Main Menu
After starting up, the “main menu (1)” screen will
appear.
The screen shows the selected job number and the
total number of envelopes that have been processed
using this job.
The main menu consists of 2 menus, “main menu
(1)” and “main menu (2)”.
The “main menu (1)” shows 7 different functions:
•
: job information (see 2.4.2 ”Job
Info” on page 12): shows job details.
A
B
C
