33
ENGLISH
The envelope height can be set between 90 mm (3.5 inch) and 162 mm (6.38 inch).
•
Press
to set a job without inserting the documents in envelopes (no envelope
mode). This can be useful for jobs, where documents only have to be sorted and/or
folded.
3.9.3
Document Settings
This screen enables the setting of the document
formats and the number of documents that must be
picked from the different feeders.
•
Press
to set the number of sheets for the
different feeders.
-
Press
to select a feeder. The selected
feeder will be highlighted.
-
Press the arrows to change the number of
sheets that must be picked from the
highlighted feeder.
When the number of documents is 0, the relevant feeder will be deselected.
Note
When a feeder is set to daily mail the number of documents is always 1 and can not be set
in this screen.
Note
The maximum number of sheets per feeder is 25. When folding is used the maximum set
thickness is 8 sheets in letter fold and 10 sheets (80 gr./m2) in single fold. When using
Folder and bottom address (see 3.9.4 ”Fold Settings” on page 34) the number of sheets is
limited further.
•
Press
to enter the document height. The height or the ISO format of the
document will be displayed next to the relevant feeder.
-
Press
to select a feeder. The selected feeder will be highlighted.
-
Press
to display a numeric keypad to enter the exact dimension of the
document.
Dimensions can be entered in mm, inches or as standard ISO paper dimensions
(depending on installation settings). The machine will not allow entering
dimensions outer technical ranges. The document size can be set between 90 mm
(3.54 inch) and 356 mm (14 inch). The default document size setting of a new
job is 297 mm (11.7 inch).
