4.
Tap the reset button for the Job total counter to set it to zero.
If you set the Job total counter to zero the number history of this
job will be lost.
5.
Tap [OK] to go back to the job overview screen and tap [Start].
Finish the Job Definition and Start the Job
When you have finished the exit settings, the touch screen shows an overview of the job
settings.
In this screen you can change the following settings:
• Move documents between feeders (see
Change to an other feeder tray
on page 43)
• Link feeders (see
on page 44)
• Change the counter settings (see
on page 29)
When you are ready with these settings, proceed as follows:
Load the documents as indicated on the Job info screen (refer also to
on page 50).
1.
4
English
31
| Page 31 | Oct-09-2019 10:11 | Working with Jobs