1
Hasler Joggers are used for aligning paper and dissipating static electricity. An electromagnetic assembly pro-
duces a vibrating action, which is transmitted to the deck and rack through a system of flex plates.
The control assembly consists of a solid-state on-off knob which also serves to control the speed, up to 4,000
vibrations per minute.
WARNING:
Failure to follow these instructions could result in unsatisfactory jogger performance, machine
damage or shortened service life, or personal injury.
INTRODUCTION
© 2009 Neopost USA Inc. All rights reserved
Bin Capacity:
Up to 800 sheets of 20# paper
Bin Size:
3.5” D x 8.75” W x 15.5” L
Media Size:
Up to 11” W x 17” L
Dimensions:
7.75” W x 19” L x 21” H
Weight:
28 lbs.
Variable Speed:
Up to 4,000 vibrations/minute
Voltage:
115 Volts (50/60 Hz) / Export 220 Volts (50/60 Hz)
Safety Certifications:
UL & CE applied for
INSTALLATION
Inspect the jogger for damage which may have occurred during shipment. If any damage is found, immediately
notify the shipping carrier and your authorized Hasler dealer.
The jogger weighs approximately 30 pounds. Lift the jogger only by the base. Lifting by the bin or top cover
may cause damage or injury.
WARNING:
The voltage and frequency of the power supply must be as specified on the nameplate. A power
supply of another rating may cause damage to the unit.
Locate the jogger on a solid support surface. The support must not vibrate while the jogger is operating. The
bin or top cover must not be in contact with any rigid object or adjacent surface; it must be free to vibrate.
