OPERATION
Place the jogger in its operating location and plug it into a self-governing electrical receptacle.
Place paper, envelopes or checks in the jogger bin(s) and turn the power/
speed control knob clockwise to turn the jogger on and adjust speed. The
vibration amplitude is changed by turning this knob. To turn the jogger off,
turn control knob all the way to the left until it clicks off.
For best results, documents should be jogged for at least 15 to 30
seconds. 10 lbs is the recommended maximum load to retain maximum
efficiency.
2
PROBLEM:
POSSIBLE CAUSE:
SOLUTION:
Unit does not operate
Defective control knob
Shorted wiring, loose connec-
tion, no power to unit
Replace control knob
Repair
Unit has power but will not
vibrate
Unit in contact with rigid object
or adjacent surface
Defective magnet controller
Defective flex plate
Isolate unit
Replace magnet controller
Replace flex plate
Excessive noise when
operating
Armature and magnet
assemblies making contact
Air gap spacers may need to be
replaced or adjusted
TROUBLESHOOTING
© 2009 Neopost USA Inc. All rights reserved
