Page 3-5
3.3.3.6 CLEAR/RESET
KEY
The CLEAR/RESET key is used to clear the current entry or reset the scale. If an
incorrect data entry is made, pressing this key will only clear the current data from
the display.
3.3.3.7 SET ZERO KEY (0)
The ZERO key is used to Zero the scale or Tare the scale. When the scale is in the
shipping mode with nothing on the weighing platform, and this key is selected the
scale zeros the weight. If a container is on the scale and the key is selected, the
weight of the container is tarred. This key is also used for the numeric 0 key when in
data entry mode.
3.3.3.8 SET METER KEY
The SET METER key is used to set the current charges on the meter. If the
“Department Prompt” is enabled in the Supervisor Menu, and the Set Meter key is
pressed, the scale will first prompt for a department before setting the meter.
3.3.3.9 SEND
LABEL
The SEND LABEL key is used to print a tape or self-adhesive label. If a transaction
is processed, pressing the Send Label key will send the charges to the meter to
generate a postage tape. If the “Department Prompt” is enabled in the Supervisor
Menu, and the Send Label key is pressed, the scale will first prompt for a
department before printing a label.
3.3.3.10 DEPARTMENT
The Department key is used to enter a department for postage charge backs.
When you press the key, the scale prompts for a department number (maximum
four digits). If less than four digits are entered, press the Enter key to complete the
entry. If four digits are entered, the scale automatically completes the entry. If the
department key is pressed again before the transaction is processed, the scale will
display the current department number.
There are two prompting modes available in the Department Setup. Refer to
Section 6.2.1 for the Department Prompting setup procedure.
3.3.4 FUNCTIONS
KEY
(SOFT
KEYS)
The function key is used to access less frequently used scale operations. The available
functions are shown on the display and accessed via the soft keys. The soft key functions
are: Manual Weight, Multiple labels, Auto Franking, Piece Count and Setup. Refer to Section
6 for the Functions key procedures.
3.3.4.1 MN WGT (MANUAL WEIGHT)
The Manual Weight function allows for a weight to be manually entered into the
system. The maximum weight that can be entered manually is 10 kg. Refer to
Section 5.5 for the Manual Weight operation procedure.
3.3.4.2 LBLS
(MULTIPLE
LABELS)
The Multiple Labels function is used to generate a quantity of labels on the postage
meter. Refer to Section 5.6 for the Multiple Labels operation procedures.
