Page 5-3
5.7 AUTO FRANKING MODE (FUNCTIONS KEY)
This is a function that will automatically set the meter or frank a label whenever a new item is
placed on the scale. Pressing any key will deactivate the Auto Franking Mode. After two minutes of
no activity, the scale will automatically exit from this mode.
1. Press ZERO key.
2. Place an item on the scale or enter the weight via the Weight Entry key.
3. Select a prime rate.
4. If desired, select one or more add-on services.
5. To automatically set the meter, press the SET METER key. To automatically frank a label,
press the SEND LABELK key.
6. Press the FUNCTIONS key.
7. Press the AuFrk soft key. The scale prompts: “Enable Auto Frank Mode?”.
8. Press the Yes soft key to enable auto set. The scale displays an “AM” icon for auto franking
with set meter or “AL” for auto franking with send label.
9. Place the next item on the scale. Once the meter is set or the label is franked, the scale beeps
twice.
10. Remove the item from the scale. The scale beeps once.
11. Repeat steps 9 and 10 until all items are completed.
5.8 PIECE COUNTING (FUNCTIONS KEY)
This function is used to count items of identical weight. To maintain the count accuracy, the
following guidelines should be followed.
•
All items placed on the scale must be of the same weight.
•
The minimum sample count is 10.
•
The minimum weight per piece must be 1 gram for a sample count of 10.
•
The total weight of the items sampled must be 10 grams or greater.
1. Remove all items from the scale.
2. Press the ZERO key.
3. Press the FUNCTIONS key.
4. Press the More soft key.
5. Press the Pcnt soft key. The scale prompts you to place a 10 piece sample count on the scale.
6. Place the 10 piece sample count on the scale and press the ENT key. The scale displays the
item count.
7. Remove the sample count from the scale.
8. Place the items to be counted on the scale. As items are added to or removed from the scale
the display reflects count.
9. Press the RESET key to return to normal scale operation.
