3
Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW
Enquiries: 0344 482 1414
http://www.neostar-electronics.co.uk
13. No naked flame sources, such as lighted candles should be placed on or near to the unit.
14. This unit is not intended for use by persons (including children) with physical, sensory or
mental capabilities or lack of experiences or knowledge. They should be given supervision and
instruction in the use of the appliance by a person responsible for their safety.
15. Do not use the unit for any purpose other than that for which it has been designed.
16. This unit is designed for domestic use only. It should not be used for commercial purposes.
17. This unit should not be adjusted or repaired by anyone except qualified service personnel.
18. Avoid contact with moving parts. Never insert any objects through the grill when the fan is
in operation.
On/off switch
On LED (green)
Tank full LED (yellow)
Relative humidity (RH) level display
RH up/down buttons
Air inlet
Dry air outlet
Carry handle
Removable water tank
Tank pull out handle
Water displacement hole with plug
Hydraulic cut-off
Power adaptor
Power socket
Rubberized feet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Numbrer Description
Operation Instructions
1. To remove excess moisture from small rooms, place the dehumidifier in the required area.
2. Check the mains voltage and ensure that it matches the voltage on the rating label.
Plug the appliance into the mains voltage.
3. Turn the unit on by flicking the on/off switch to the on position. The unit is now ready to use. To turn
the unit off flick the switch to the off position.
Parts & Controls
Relative Humidity Levels
This dehumidifier features an advanced humidistat function. Dehumidifiers without a humidistat stay on
and work hard, non-stop even if the RH levels drop as low as 20%. This wastes energy and wears out the
power adapters. With this Dehumidifier's humidistat function, you can set your desired relative humidity
level in the range of between 40%-80%. When the RH levels increase beyond your set level by a value of
5%, the machine automatically turns on. When the RH levels drop below your set level by a value of 5%,
the machine automatically turns off. By default, the unit is set to 50% RH.
