6
Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW
Enquiries: 0344 482 9700
E) track separation
You can divide the recording music from tape or Aux in to USB track by track during encoding. Every time when press
the “
“ (track separation) button (21) during encoding from tape or Aux in, the system will generate a new track
and continue the recording. The text “ TAPE“ or “ AUX “ at LCD display will flash once, to indicate the unit has created a
new track successfully.
Removing of USB
To remove the USB / memory card, turn off the power or switch the function mode to CD, AUX or Tuner first. Next
carefully pull/unplug the device from the USB port.
Deleting of MP3 files
The system has no delete function of the MP3 files. Please manage the erasing of the MP3 files by computer or
other device.
Listing to tape
General operation
Stop / eject key
press to stop all deck operation. Press again to open the cassette door.
Fast forward key &
press to start rapid tape winding in either forward or revers
Fast rewind key
direction. Press stop / fast rewind key eject keys when the cassette spools stop turning.
Play key
press to start playing tape.
Pause key
press to stop tape operation temporarily. Press again to resume play.
Record
key
press together with play key to start tape recording.
Playback
Select “ Tape ” by Function button (10)
Put in the cassette tape.
Press
play
key to active playback
Adjust the Volume up/down control (8) to the desired level.
Use pause key
when you want to stop playback temporarily.
Press stop / eject key
when finished.
Recording
The cassette deck can record in all function modes (CD/Tuner/USB/Aux) using the following procedures:-
Select the function which you want to record to cassette tape.
Insert a blank cassette tape in cassette deck.
Press
“ record” & “ play “ key to start recording.
Start the playback of the music source which you want to record to tape
Press
“pause ” keys and then “stop/eject
” key at cassette deck when finish.
Should you require any further assistance using your device please contact Scotts Customer Service team who
will be happy to help.
To help reduce power consumption the unit will switch to standby mode
automatically if no music is played for over 15 minutes. Press the power button to
switch the unit back on.
*DESIGN AND SPECIFICATIONS - SUBJECT TO CHANGE WITHOUT NOTICE
The crossed-out Wheelie Bin logo is used to highlight electrical products that should not be
disposed of with normal household waste. Scotts Ltd has contributed to the funding of an
alternative network of UK recycling facilities. Please visit www.recycle-more.co.uk to find where
your nearest recycling point is and recycle this product at the end of its life.
Made
in
China
for
Scotts
Ltd
