POC-100 User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 4 of 65
Bottom View ..................................................................................................... 33
Chapter 3 Getting Start ................................................................................................... 34
3.1
Install a 2.5” HDD/SSD on SATA Port .............................................................. 34
3.2
Install a mSATA SSD on mSATA Port ............................................................... 36
3.3
Install a Mini-PCIe Module ............................................................................... 37
3.4
Mount your POC-100 ....................................................................................... 40
3.5
Connect DC power to you POC-100 ................................................................ 44
Connect DC power via DC jack ........................................................................ 44
Connect DC power via 2-pin pluggable terminal block (POC-100ST Only)...... 44
3.6
Power on your POC-100 .................................................................................. 46
To power on POC-100 using the power button on the front panel .................... 46
To power on POC-100 using an external latched switch (AT-mode) ................ 46
To power on POC-100 using an external non-latched switch (ATX-mode)....... 48
To power on POC-100 using Wake-on-LAN function ....................................... 49
Chapter 4 BIOS and Driver ............................................................................................. 52
4.1
BIOS Settings .................................................................................................. 52
COM1 Operating Mode .................................................................................... 52
COM3 Operating Mode (Optional) ................................................................... 53
SATA Controller Mode ...................................................................................... 53
IGD Boot Type & LVDS Output Resolution ...................................................... 54
Power On after Power Failure Option .............................................................. 56
Wake-on-LAN Option ....................................................................................... 56
Watchdog Timer for Booting ............................................................................. 57
Select a Boot Device ........................................................................................ 58
4.2
Operating System Support ............................................................................... 60
4.3
Driver Installation ............................................................................................. 61
To install all drivers using “One-Click” driver installation .................................. 61
Appendix A Using H/W Watchdog Timer........................................................................ 62
A.1
Install WDT and DIO Library ............................................................................ 62
A.2
Function Reference .......................................................................................... 64
InitWDT ............................................................................................................ 64
SetWDT ........................................................................................................... 64
StartWDT ......................................................................................................... 65
ResetWDT ....................................................................................................... 65
StopWDT ......................................................................................................... 65
