POC-100 User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 58 of 65
3. Disable or select timeout value for [WDT for Booting] option.
4. Once you give a timeout value, the [WDT Stop Option] option appears. You can select
“Automatically after POST” or “Manually after Entering OS”.
Select a Boot Device
When you have multiple bootable devices connected to your POC-100 (i.e. HDD, mSATA,
USB flash disk, USB DVD-drive), you may need to select one of them as the boot device.
There are two ways to select the device. You can either, press F12 when system boots up
to go to Boot Manager and then select one of the devices, or select the boot device in BIOS
settings.
To select a boot device in BIOS:
1. When POC-100 boots up, press F2 to enter BIOS setup utility.
2. Go to [Boot]
[Select Boot Device].
3. The [Boot Menu] option decides whether to list all bootable devices connected to your
POC-100 according to device or device category. You can use F5/F6 or +/- to change
the boot order of devices or device categories.
