10 Troubleshooting
10.1 Error messages B-Control
10.1.1 Error code display
If an error is detected, the error code is displayed automatically.
Note
The reset is automatic.
10.1.2 Fault code display
If a fault is detected, the fault code is displayed automatically.
Note
The
and
icons flash.
Reset by pressing the
button.
10.2 Error messages IniControl 2
10.2.1 Error messages
Resetting the control panel allows the appliance to be restarted.
The message
appears when a fault code is detected. After resolving
the problem, pressing the
key resets the appliance's functions and
thus eradicates the fault.
If several faults occur, they are displayed one after the other.
1. Reset the control panel by pressing the
key for 3 seconds,
when an error message is displayed.
In economy mode, the appliance will not run a domestic hot water
heating cycle after a central heating cycle.
2. Display the current operating status by briefly pressing the
key.
10.2.2 Accessing the error log
Note
The error and fault codes are listed together in the log.
1. Access the menus by pressing the two keys on the right simultane
ously.
Fig.52
Error code display
MW-3000240-4
Fig.53
Fault code display
MW-6000210-4
Fig.54
MW
-5
0
0
0
0
6
1
-3
Fig.55
MW-5000060-3
Fig.56
MW-2000369-1
10 Troubleshooting
36
EF
7628792 - v03 - 25072017
