background image

2. Select the required parameter by pressing the   or   keys to scroll 

through the list of adjustable parameters. 

3. Confirm the selection by pressing the 

 key.

4. Modify the value of the parameter using the   or   keys.
5. Confirm the new value of the parameter by pressing the 

 key.

6. Go back to the main display by pressing the 

h

key.

For more information, see

Browsing in the menus, page 18

Selecting a PCB, page 19

8.2.2 

Setting the heating

Caution

The name of the PCB is displayed. Check that it is actually the 

PCB on which the setting must be made.

Note

The heating mode can be managed using the TIME PROG menu.

1. Access the heating parameters by pressing the   key twice. 

Note

If no outside temperature sensor is connected, this menu can be 

used to set the temperature of the heating water.

If an outside temperature sensor is connected, this menu can be 

used to set the indoor temperature setpoint.

2. Display the parameters for the required circuit by pressing the   or 

 key. 

The name of the circuit and the heating water temperature set 

point are displayed alternately.

3. Confirm by pressing the 

 key.

4. Access setting of the heating water temperature set point by press­

ing the 

 key.

5. Set the heating water temperature set point by pressing the   or 

key. 

Note
Press the 

h

 key to cancel all input.

6. Confirm the new temperature setpoint by pressing the 

 key.

7. Go back to the main display by pressing the 

h

 key.

8.2.3 

Setting the domestic hot water temperature

Note

Domestic hot water production can be managed via the TIME 

PROG sub-menu dedicated to timer programming.

1. Access the domestic hot water production parameters by pressing 

the 

 key twice. 

Fig.37

MW

-5

0

0

0

0

4

0

-5

Fig.38

MW-5000144-3

Fig.39

MW-3000249-4

Fig.40

MW-6000254-2

8  Control panel settings IniControl 2

28

EF

7626252 - v02 - 17102016

Summary of Contents for EF 22









































Reviews: