N58 Hardware User Guide
Chapter 2 About N58
Copyright © Neoway Technology Co., Ltd. All rights reserved.
16
One MIC interface, built-in bias voltage ranging from 2.2 V to 3 V.
One SPK interface, module built-in class AB/class D power amplifier, maximum
output power of 800 mW@4.2 V/8 Ω.
One I2C interface, supporting only the master mode.
AT command
3GPP Release 13
Neoway extended commands
SMS
PDU, TXT
Data
PPP, RNDIS, ECM
Protocol
TCP, UDP, MQTT, FTP, HTTP/HTTPS, SSL, TLS
Certification
approval
CCC, SRRC, RoHS, CE, CTA
Sleep mode
2)
: indicates that the module enters the low power consumption state. In this state, the peripheral
interface of the module is disabled, but the radio frequency function is normal. The module will exit the sleep
mode when there is an incoming call or an SMS message, and will re-enter the sleep mode when the incoming
call and voice end.
Idle mode
3)
: indicates the status of the module when the module is functioning properly and there is no data
service.
Operating mode
4)
current indicates the operating current of the module when there is data communication. In
operating mode
4)
, only an example of the current in LTE mode is provided. For details about the current in non-
LTE modes, see the N58 current test report.
