SKE4 Steam Humidifier
LonWorks Integration Manual
www.neptronic.com
Page | 2
Introduction
The Neptronic Echelon module for the SKE4 series of humidifiers utilizes Field Server / Sierra Monitor Corporation
FFP-LON ProtoCessor (FPC-ED4) as a backbone. As such the ProtoCessor node acts as a protocol gateway
between the native BACnet IP module of the humidifier and converts the BACnet data into standard Echelon snivets
through an RJ45 Ethernet connection.
It is important to follow the installation procedure properly, before beginning the integration process.
Installation Steps
All installation work must be carried out by suitably qualified personnel and must conform to local
codes and regulations.
CAUTION: Risk of electric shock. The electric supply of the humidifier must be shut down.
Disconnect the power at the External Breaker/Fused Disconnect before commencing installation
work.
The following describes the procedure to follow in order to install the Neptronic LonWorks FTT Module for the SKE4
humidifier. The steps and guidelines outlined must be followed in order to avoid any anomaly resulting from inaccurate
installation.
List of Accessories Supplied
1x
Neptronic LonWorks FTT Module (SF SK4LON)
2x
Nylon standoffs
1x
Ethernet IP Board
1x
USB Cable
1x
Ethernet Cable
