background image

Introduction

1-4

MRX920 Getting Started Guide

Conventions Used in this Guide

This guide uses the following icons and typographical conventions to 
identify special information.

Product Support within North America

Neptune offers various methods to receive high-quality, responsive 
Customer Support. However, before contacting Neptune, it is important 
that you know the version number of the host software that your 
MRX920 uses. This information is useful to the Customer Support 
Specialist who addresses the call.

The Warning icon identifies actions that can cause injury to the user or 
permanently damage the product.

The Caution icon identifies important information that is critical to ensuring that 

data stored with the MRX920 is not lost.

The Note icon identifies information that clarifies a point within the text.

All small caps

Refers to keys. Examples: 

ENTER

ALT

TAB

All bold initial caps

Refers to field names, menus, buttons, and menu options. Example: 

Device

 field or 

File

 menu.

+ between keys

Refers to pressing the keys at the same time. Example: 

ALT

+

B

The version number of MX900 software is located on the title bar at the top of 

your window.

Summary of Contents for MRX920





































































Reviews: