Cleaning and Maintenance:
Cleaning and Maintenance:
Detergent
When cleaning the refrigerator, first disconnect the appliance from the power
supply by removing the plug. Wipe the appliance carefully with a cloth and
neutral cleaning agent, then wipe it clean with fresh water.
1.
Never use acids, chemical solutions, thinners or the like to clean the
refrigerator
because they may damage the paint work and plastic components of the refrigerator.
2.
Changing the Light Bulb:
Changing the Light Bulb:
1. Hold the lamp cover and push toward the inside of the cabinet.
2. Remove the lamp cover.
3. Unscrew the bulb and screw in a new 10W bulb.
4. Hold the lamp cover and put the hook of the lamp cover to click into the thermostat box.
5. Pull the lamp cover forward to click into the thermostat box.
4
5
6
7
Thermostat
Lamp cover
The refrigerator has the capability of opening the door from either the left or the right side.
The unit is delivered to you with the door opening from the left side. To change the opening
direction, please follow these instructions.
Note: Before reversing the door, unplug the appliance from the mains or disconnect the
electrical power supply.
Reversing the Door:
7
8
Door opening from left side
Door opening from right side
1. Remove the screws (6) which fix the worktop(7) to disassembly the worktop.
2. Remove the two screws (1) that hold the upper hinge (5) (right side) to the frame.
Take away the upper hinge (5).
3. Lift the door and place it on a padded surface to prevent scratching it.
4. Remove the two screws (8) that hold the lower hinge (2) and make sure to remove
the lower hinge (2).
5. Remove the left front leg (4) and transfer it to the right side.
6. Before placing this lower hinge (2), remove the blot-pin (9) and reverse the direction
of the lower hinge (2). Then install the lower hinge (2) onto the left side of the lower
frame with two screws (8).
7. Insert the bolt-pin (9) to the lower hinge (2).
8.
9. While holding the door in the closed position secure the upper hinge (5) in the top
frame of left side with two screws (1). Please remember that do not tighten the two
screws (1) until the top of the door is levelled with the counter top.
10. Install the worktop onto the top of the cabinet with screws (6).
Set the door into place making sure the door seals at the lower hinge (2).
If the refrigerator is not cool enough ensure that:
The thermostat is at the correct setting.
There is enough space around the refrigerator.
The doors are not opened too frequently and for too long.
The refrigerator is not overloaded and hot food has not been placed in the refrigerator.
The refrigerator is not in direct sunlight or placed near a heat source.
2.
If the food in the refrigerator is freezing ensure that:
The thermostat is at the correct setting.
There is not too much food in the refrigerator.
When the refrigerator operates too noisily ensure that:
The refrigerator is properly leveled.
The refrigerator is not touching objects around it.
The containers or solid packages stored inside are not touching each other.
During periods of high humidity, moisture may form on the surfaces of
the refrigerator. This is not a fault and maybe wiped away.
If after checking the above suggestions your refrigerator is still not
functioning properly, please contact Customer Services without delay.
Note:
Note:
3.
4.
When the refrigerator does not operate ensure that:
The electric power is supplied and the voltage is normal.
The fuse or circuit breaker is not
out or tripped.
The power plug is plugged in firmly in the outlet socket.
blown
1.
Troubleshooting:
9
This appliance is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Keep ventilation openings, in the appliance enclosure or in the built-in structure
clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
Warnings:
Important Disposal Instructions:
As a responsible retailer we care about the environment.
As such we urge you to follow the correct disposal procedure for your product
and packaging materials, this will help conserve natural resourses
and ensure that it is recycled in a manner that protects health and the
environment.
You must dispose of this product and its packaging according to local laws
and regulations. Because this product contains electronic components and
sometimes batteries, the product and its accessories must be disposed of
separately from household waste when the product reaches its end of life.
Contact your local authority to learn about disposal and recycling.
The product should be taken to your local collection point for recycling.
10
Remove the plug and ensure that any locks or catches are removed, to
prevent young children being trapped inside.
This appliance may contain a small quantity of environmentally friendly, but
flammable, non-synthetic R600a refrigerant:
Upon opening and installing your product, check that the tubing of the refrigerant
circuit is not damaged during transportation.
Leaking refrigerant may cause eye injuries or ignite.
The room for installing appliance must be at least 1m per 8g of refrigerant.
The amount of refrigerant in the appliance can be found on the rating plate the
back of the unit.
Keep ventilation openings in the appliance enclosure or in thebuilt-in structure
cleaer of obstruction.
Do not damage the refrigeration circuit.
If you are unsure of the refrigerant type check the rating plate on the back of the unit.
11
R600a Refrigerant:
Do not attempt to repair or replace any part of the bar fridge unless it is specially
recommended in this manual. Refer all other servicing to a qualified technician,
or contact the after sales support line for advice on repair or replacement.
It is hazardous for anyone other than an Authorised Service Person to service
this appliance. In Queensland - the authorized Service Person MUST hold a
Gas Work Authorisation for hydrocarbon refrigerants, to carry out Servicing
or repairs which involve the removal of covers.
