INSTRUCTIONS FOR USE
BEFORE THE FIRST USE
Before using the toaster for the first time, clean the appliance (see paragraph
“
CARE AND
CLEANING”
). Operate the toaster at least two times without bread but on the highest setting.
Ventilate the room during this period.
As with all new electric heating elements, your toaster creates a smell when it is first switched on.
This is quite normal and not a cause for concern.
TOASTING
Plug toaster into the power supply and place 1 or 2 slices of bread into the bread slots of the
appliance.
Adjust the 7 setting timer to a desired level:
1 - minimum level
7 - maximum level
Press down the sliding lever, the toaster will start running automatically and light indicator will go on.
Bread slices will be ejected out and the appliance will shut down automatically when toasting is
finished.
REHEAT FUNCTION
You can use the reheating facility if cooked toast is cold.
Insert toast into the toaster and pull down the sliding lever. Press the reheat function button
REHEAT (R)
. The indicator will light up.
Cold toast can be reheated in a short time without over browning.
DEFROST FUNCTION
Press defrost function button
DEFROST (D)
to prolong toasting time of frozen bread.
CANCEL BUTTON
Toasting can be reset anytime during toasting by pressing
CANCEL (C)
button.
CRUMB TRAY
The crumb tray is intended for collecting crumbs, which fall on the base of the toaster while toasting.
Pull the crumb tray out, empty and place it back.
