background image

NeSS GSM DIALLer INStALLAtIoN & oPerAtIoN NoteS, revision 1
Document Part Number 890-401
For the products: 106-096 Ness GSM Dialler with SIM

CoPyrIGht NotICe
All rights reserved. No part of this publication may be reproduced, transmitted or stored in a retrieval system in any form or by 
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Ness.  
Ness reserves the right to make changes to features and specifications at any time without prior notification in the interest of 
ongoing product development and improvement.
© 2009 Ness Security Products Pty Ltd ABN 28 069 984 372   

sPEcIfIcatIons

GsM CoMPatIbIlIty

GSM module compatible with GSM voice communications

sIM Card

Ness SIM Card supplied (Locked)

alarM PaNel CoMPatIbIlIty

Compatible with all Ness alarm diallers in Contact ID DtMF and Voice reporting 
formats.

oPeratING voltaGe

12VDC plug pack supplied

battery baCkuP

Internal rechargeable battery

aNteNNa

0dB whip with magnetic base, 5m cable length

dIMeNsIoNs

250 x 140 x 60mm

WeIGht

1.5kg

oPeratING teMPerature

0°C to +50°C

Summary of Contents for 106-096

Page 1: ... of a land line Plug and go operation no programming required Antenna with magnetic base supplied long cable allows the unit to be installed in a secure housing Backlit LCD display shows system status and call progress SIM card supplied Plug pack powered with battery backup GSM comms to central station No Landline Required GSM Unit Control Panel Dialler ...

Page 2: ...n Antenna Socket Connect the antenna cable to the GSM unit and place the antenna as far as possible from the unit The antenna is supplied with a 5m cable to allow positioning of the antenna for best signal reception Excess cable should be kept straight and not be coiled to prevent radiant interference 5m cable Magnetic base For your security the Ness SIM Card is locked and cannot be used in any ot...

Page 3: ...pplied NESS SIM card the SIM card may already be installed 3 Connect a standard RJ45 telephone lead from the alarm panel s dialler to the TEL1 socket on the GSM unit 4 Connect the antenna cable to the antenna socket and mount the antenna in a position at least 1m away from the GSM unit 5 Plug in the supplied 12VDC plug pack to the power socket 6 Turn on the power switch 7 Check the signal strength...

Page 4: ...o features and specifications at any time without prior notification in the interest of ongoing product development and improvement 2009 Ness Security Products Pty Ltd ABN 28 069 984 372 Specifications GSM Compatibility GSM module compatible with GSM voice communications SIM Card Ness SIM Card supplied Locked Alarm Panel Compatibility Compatible with all Ness alarm diallers in Contact ID DTMF and ...

Reviews: