11.
(See photos below). Take a short bolt, place a washer over the end of it.
Thread the bolt through the hole at the bottom of the leg and into the end of the
pole until the pole is fixed in position. The pole will disappear into the hole in the
leg.
Repeat this on the opposite end of the pole. Now spread your cover out equally
along the pole, then dress your open frame as desired (see photos below).
Finally, go and tighten all the bolts around the frame. Do not over tighten them.
10.
Take the second pole and thread it through the sewn hem at the bottom of
the lace cover at the rear. See the photos below. Thread all the cover onto the
pole but don’t spread it along the pole just yet.
