Messages
Smoke is clearing
Living Room
TODAY, 1:25 PM
Smoke is clearing
Living Room
TODAY, 1:25 PM
Emergency
Living Room
TODAY, 1:25 PM
Heads-Up
Living Room
There is smoke in the living room.
The alarm may sound.
Breaker box
2
2
1
9
8
5. Turn off power
Protect yourself and avoid blowing a fuse.
Switch off the correct circuit breaker or remove
the fuse from the fuse box.
6. Remove your old smoke alarm
Make sure the green LED on the old alarm is off
then pull your old smoke alarm off its base, and
disconnect its power wires.
Your old smoke
alarm might
make a really
loud noise when
you disconnect it.
7. Remove the old base
Unscrew the base plate from the electrical box.
Save the screws for later.
The installation of a smoke/CO alarm should
be made by a qualified technician, and all
wiring used to install this alarm should be
made in accordance with articles 210, and
300.3B of the National Electrical Code ANSI/
NFPA 70, NFPA 72, and/or applicable codes in
your local jurisdiction.
For a complete set of instructions and
warnings, refer to page 22.
WARNING
ELECTRICAL SHOCK HAZARD
Failure to turn off the power may result in
serious electrical shock, injury and death.
SETUP AND INSTALLATION
(Professional installation recommended)
Tip: Lay everything out on a table for an easy installation.
2. Wake it up
Remove the dust cover and pull out the battery
tab to wake up your Nest Protect.
3. Press the Nest button
Nest Protect will glow blue when it’s awake.
1. Get the Nest Mobile app
You’ll use the Nest Mobile app to get Nest
Protect connected to your Wi-Fi, to the Internet,
and to additional Nest Protects in your home.
4. Set up Nest Protect
The video at
nest.com/protect/installation
shows how.
The app will guide you through creating a
free Nest account, pairing your Nest Protect
securely, and telling Nest Protect which room
it’s in.
