Content
1. General
5
2. The products of NC-1000 system
6
3. Mounting of the frame
8
4. Earthing of the frame
8
5. Termination of outdoor cables to NC-1000 frame
9
5.1 Termination of outdoor cables to pigtail cables within the NC-1000 frame
9
5.1.1 Installation of the splice tray holder
9
5.1.2 Bringing cable to the frame
10
5.1.3 Preparation and earthing of cables
10
5.1.3.1 Stranded loose tube cables
10
5.1.3.2 Central loose tube cable
11
5.1.4 Fibre entry to the splice tray
12
5.1.5 Installation of the splice trays to the splice tray holder
13
5.1.6 Installation of NC-1000 patch panel
13
5.1.7 Bringing of pigtail cables for splicing
16
5.1.8 Construction, colour coding and the main properties of the pigtail cable
16
5.1.9 Preparing the pigtail cable for splicing
17
5.1.10 Splicing of fibres
1
9
5.1.11 Fastening and earthing of cables
19
5.1.12 Fastening of the fibre tubes
1
9
5.1.13 Finishing the termination
20
5.2 Termination of cables when outdoor cables are spliced to pigtail cables outside the NC-1000
frame
21
5.2.1 Bringing the outdoor cables to the splicing point
21
5.2.2 Installation of the NC-1000 patch panel
21
5.2.3 Bringing the pigtail cables from the NC-1000 frame
22
5.2.4 Finishing the termination in the NC-1000 frame
23
5.2.5 Bringing the pigtail cables to the splicing point
23
5.2.6 Construction, colour coding and the main properties of the pigtail cable
23
5.2.7 Preparing pigtail cable for splicing
23
5.2.8 Splicing of fibres
2
4
6. The installations of the patch cords
26
6.1 Patch cord installations into the NC-1000 patch panels
27
6.2 Patch cords inside the NC-1000 frame
27
6.3 Patch cords between the NC-1000 frame and equipment racks
28
6.4 Patch cords between the NC-1000 frames
29
INSTALLATION MANUAL
NC-1000
FIBRE OPTIC
CROSS-CONNECTION SYSTEM
NC-1000 installation manual © Nestor Cables Ltd. 2011