nestor cables NC-1000 Installation Manual Download

Page: 4 / 17

NC-1000 -

installation manual

2. The products of NC-1000 system

Product

Short description

Product No.

NC-1000 frames with accessories
NC-1000 Optical Distribution Frame,

2200 mm

ODF frame with a turnable inner frame and fibre guides,

height 2200 mm. Includes doors and coverings for both

sides.

LV1109

NC-1000 Optical Distribution Frame,

2000 mm

ODF frame with a turnable inner frame and fibre guides,

height 2000 mm. Includes doors and coverings for both

sides.

LV1110

NC-1000 Back cover, 2200 mm

Back cover for NC-1000 frame, height 2200 mm

LV1115

NC-1000 Back cover, 2000 mm

Back cover for NC-1000 frame, height 2000 mm

LV1116

NC-1000 Splice tray holder

Holder for 18 NC-48 or LT-48 splice trays

LV1117

Universal splice tray NC-48

Splice tray for 48 splices

LV1075

Splice tray LT-48

Alternative splice tray for 48 fibres

LV1397

NC-1000 Wall mounting kit

Wall mounting kit for fastening NC-1000 frame to the wall

from the top

LV1118

Pre-assembled NC-1000 patch panels with SC/UPC connectors

NC-1000 SC 24xSML 5 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/UPC connectors, length 5 m.

LV1123

NC-1000 SC 24xSML 15 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/UPC connectors, length 15 m.

LV1124

NC-1000 SC 24xSML 25 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/UPC connectors, length 25 m.

LV1125

NC-1000 SC 24xSML 50 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/UPC connectors, length 50 m.

LV1127

NC-1000 SC 24xSML A m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/UPC connectors, the length is specified by the customer.

LV1128

NC-1000 SC 48xSML 5 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/UPC connectors, length 5 m.

LV1129

NC-1000 SC 48xSML 15 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/UPC connectors, length 15 m.

LV1130

NC-1000 SC 48xSML 25 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/UPC connectors, length 25 m.

LV1131

NC-1000 SC 48xSML 50 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/UPC connectors, length 50 m.

LV1133

NC-1000 SC 48xSML A m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/UPC connectors, the length is specified by the customer.

LV1134

Pre-assembled NC-1000 patch panels with SC/APC connectors

NC-1000 SC/APC 24xSML 5 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/APC connectors, length 5 m.

LV1174

NC-1000 SC/APC 24xSML 15 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/APC connectors, length 15 m.

LV1175

NC-1000 SC/APC 24xSML 25 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/APC connectors, length 25 m.

LV1176

NC-1000 SC/APC 24xSML 50 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/APC connectors, length 50 m.

LV1178

NC-1000 SC/APC 24xSML A m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

SC/APC connectors, the length is specified by the customer.

LV1179

NC-1000 SC/APC 48xSML 5 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/APC connectors, length 5 m.

LV1180

NC-1000 SC/APC 48xSML 15 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/APC connectors, length 15 m.

LV1181

NC-1000 SC/APC 48xSML 25 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/APC connectors, length 25 m.

LV1182

NC-1000 SC/APC 48xSML 50 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/APC connectors, length 50 m.

LV1184

NC-1000 SC/APC 48xSML A m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

SC/APC connectors, the length is specified by the customer.

LV1185

Product

Short description

Product No.

Pre-assembled NC-1000 patch panels with LC/UPC connectors

NC-1000 LC 24xSML 5 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

LC/UPC connectors, length 5 m.

LV1135

NC-1000 LC 24xSML 15 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

LC/UPC connectors, length 15 m.

LV1136

NC-1000 LC 24xSML 25 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

LC/UPC connectors, length 25 m.

LV1137

NC-1000 LC 24xSML 50 m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

LC/UPC connectors, length 50 m.

LV1139

NC-1000 LC 24xSML A m

NC-1000 patch panel with 24 fibre pigtail cable terminated to

LC/UPC connectors, the length is specified by the customer.

LV1140

NC-1000 LC 48xSML 5 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

LC/UPC connectors, length 5 m.

LV1141

NC-1000 LC 48xSML 15 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

LC/UPC connectors, length 15 m.

LV1142

NC-1000 LC 48xSML 25 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

LC/UPC connectors, length 25 m.

LV1143

NC-1000 LC 48xSML 50 m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

LC/UPC connectors, length 50 m.

LV1145

NC-1000 LC 48xSML A m

NC-1000 patch panel with 48 fibre pigtail cable terminated to

LC/UPC connectors, the length is specified by the customer.

LV1146

Indoor/outdoor cables for pigtail cable kits with a customized length

FZOMSU-SD Mini 2x12xSML

24 fibre indoor/outdoor cable, od. 7,5 mm

L10392

FZOMSU-SD Mini 4x12xSML

48 fibre indoor/outdoor cable, od. 7,5 mm

L10393

NC-1000 splitter modules
NC-1000 splitter 1x16 SC/APC

Splitter module 1x16 with SC/APC connectors

LV1186

NC-1000 splitter 1x32 SC/APC

Splitter module 1x32 with SC/APC connectors

LV1187

NC-1000 splitter 1x64 SC/APC

Splitter module 1x64 with SC/APC connectors

LV1240

Summary of Contents for NC-1000


















Search results

Summary of Contents for NC-1000

Reviews:

Related manuals for NC-1000

Brands by name

Popular brands

nestor cables NC-1000, Installation Manual

Search results

Summary of Contents for NC-1000

Reviews:

Related manuals for NC-1000

Brands by name

Popular brands