Installation Instruction
20201210/ML/01
Nestor Optimus DB Reducers
Page 6 of 6
©
Nestor Cables Ltd. 2020.
10.12.2020
The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the
prior written consent of Nestor Cables Ltd. The information is believed to be correct at the time of issue. Nestor Cables Ltd. reserves the right
to amend this specification without notice. This specification is not contractually valid unless specifically authorized by Nestor Cables Ltd.
Excessive forces
•
Do not over-stress the products by rotation, twist, bending, shock, fatigue or other excessive
forces. This may damage the fittings and cause malfunctions, leaks or failure.
•
The performance limits of the connectors are detailed in the technical specifications and must
be respected during the installation.
•
Do not use the products where ambient temperature and/or fluid temperature and pressure
may exceed the limits indicated in our technical specifications.
Additional notices
Nestor Cables Ltd. reserves the right to modify the products from time to time when required by
quality improvements and by market requirements. The actual product may differ from the pictures
and drawings shown in the catalogues.
We recommend to only use Nestor Optimus accessories when building the microduct network. Using
non-recommended products could invalidate the guarantee. The customer is responsible for
checking the performance of the products after the installation.
It is
end user’s responsibility to keep the correct traceability of the product. The production codes of
the items are clearly indicated on the packaging. In the case of a claim, the correct production code
must be communicated to Nestor Cables Ltd. The failure in communicating the production code may
invalidate the guarantee.
